人香蕉猫咪视频伊在线

<center id="qox4j"><small id="qox4j"><track id="qox4j"></track></small></center>
    <code id="qox4j"><em id="qox4j"></em></code>
  1. <center id="qox4j"><small id="qox4j"><track id="qox4j"></track></small></center>
      <center id="qox4j"><em id="qox4j"><track id="qox4j"></track></em></center>
    1. <strike id="qox4j"><video id="qox4j"></video></strike>

            1. You are not logged in.    Login  |  Register  |  Help
               
               



              Additional Photos
              We are awaiting video for this item from the principals. Click here to view all literature

              For Immediate Answers Contact:
              Jeff Terrill
               
              (800) 374-5009 ext. 349
              Intl. +1 (704) 841-2001
              jeff.terrill@exfactory.com





              If not available, try his/her backup:
              Dan Wolters at ext ...376
              dan.wolters@exfactory.com





              EXF #: FJ-300012
              Brand/Model:

              CAM-WOOD SFJ-3800-205-FM-FAH

              Machine Type:

              FINGER JOINTER (HORIZONTAL JOINT)

              Condition: Brand New w/Warranty
              Elect./Voltage: 230/460/575 V, 60 Cy, 3 Ph
              List Price: $ 750,000
              Our Price: $ 588,800
              Financing: $ 11,702 National Capital Leasing
              Questions:
              For Instant Communication, Click Here
               
              Description:
              CAM-WOOD MODEL SFJ-3800-205-FM-FAH HIGH SPEED, LONG BOARD, HORIZONTAL JOINT, FINGER JOINTER:

              • Double Chain & Slat Type Shaper Section designed for long incoming boards
              • Manual infeed; Slat Bed Feed Chain runs at up to 75 FPM; lugs on 30" centers. Slat Bed powered with a 15 HP gear motor with 1:40 gear ratio.
              • Table Transfer Roll Motors, even ends boards to the Right and Left Shaper Fences: powered by (2) 7-1/2 HP motors  
              •  Power raising and lowering of the holddown assemblies on both Shaper Sections; Powered with (2) 2 HP motors
              •  (1) Pair Scoring Saws with 2 HP motors, 50mm arbor, 2,850 RPM, scoring blade size of 7” x 50 tooth, (4) Blades included
              • (1) Pair Trim Saws with 10 HP motors, 50mm arbor, 4,275 RPM, trim saw blade size of 10” x 100 tooth. (2) Blades included
              • (1) Pair Vertical Hogging Shaper Spindles with 10 HP motors, 50mm arbor, 4,375 RPM, hogging blade size of 9.4” x 50 tooth. (2) Blades included
              • (1) Pair Vertical Finish Shaper Spindles with 20 HP motors, 50mm diameter spindles, 5,300 RPM. For
              • 50mm bore x 160mm dia. cutterheads; finger length of 1.122”; cutterheads and knife profile to buyer’s specification
              • Extrusion Type Glue Application System for PVAC Glues; mounted on Right Side Shaper Section. Includes glue pump, valves, and glue injection thru the applicator comb machined to buyer's specifications.  
              • Optional APQUIP Glue System available at extra cost
              • Optional Glue Equipment available for Loctite HB X Glue at extra price
              • Deduct $5,200 if provided without a Glue System

                SCC-20 TRANSFER CONEYOR  
              • Conveyor between Shaper Section to the Press Section
              • Working dimension: from 1” to 8” wide x 12” to 12’-6” long
              • Speed 230 FPM
              • Powered by (1) 3HP
                 
                HSC-65 HIGH-SPEED PRE-PRESS ASSEMBLY SECTION
              • Working dimensions: 1” to 8” wide x 3/4” to 2-1/4” high x up to 21’ long
              • (2) 5 HP motors drive the double flat top chains
              • Feed speeds from 32 to 295 FPM
              • Includes (1) 15 HP Frequency Converter to power the feed chain motors at speeds determined by incoming boards lengths
                 
                NFJ-1500 50’ HEAVY DUTY AUTOMATIC ASSEMBLY PRESS
              • Working dimension: 1” to 8” wide x 3/4” to 2-1/4” high x up to 50’ long
              • Power of upper rollers: (2) 3HP motors with a 1:10 gear ratio
              • Power of lower roller: (1) 5HP motor with a 1:10 gear ratio
              • In-feed Inverter: (1) 15HP motor
              • In-feed speed: From 32 to 295 FPM
              • Cut-off saw: With 7.5HP motor driving the arbor at 2,850 RPM
              • Sawblade: 14” diameter x 120 tooth
              • Hydraulic power to the Pressing Cylinders: (2) 20HP with high speed oil tank
              • Hydraulic pressure output: 1,700 PSI at the joint
              • Capacity (1) to (4) 50’ assembled boards per minute
              • Machine comes arranged with equipment to assemble (3) sizes of material cross sections according to buyer’s specifications for width within +/-3/16” width tolerance

                SYSTEM REQUIREMENTS FOR INCOMING BOARDS
              • Incoming lumber length: 1’ to 12.4’
              • Working thickness 3/4” to 2-1/4”
              • Working width: 1” to 8”  (+/- 3/16")
              • Glue type to be used:  PVAC
              • Species: Soft and Hardwoods
              • Moisture content: 8 to 12%
                 
                REQUIRED QUALITY OF INCOMING BOARDS
              • Board length:  At least 50% longer than its width.
              • Board surface: S4S to a tolerance of ±0.2mm.  
              • Require 90degree right angle at all surfaces to edges
              • Lumber must be straight.
                 
                PRODUCTION NUMBERS
              • Shaper Section:
              • Shaper runs at (30) slats per minute
              • Average board length is 6’-6”
              • Shift is 480 minutes long
              • 0.8 efficiency factor = 76,032 lineal feet per shift.
                 
              • Assembly and Press Section:
              • (4) Assembled Boards per minute
              • Board length is 50’
              • Shift is 480 minutes long
              • 0.8 efficiency factor = 76,800 lineal feet per shift
              • NOTE: Actual capacity of the system depends on the length and number of boards that are fed to the Shaper Section. 
                 
                TO BE PROVIDED LOCALLY
              • Total electricity demand: 180 HP
              • Electric power supply to Motor Control Center
              • Constant voltage, voltage deviations max.: 5%
              • Temperature range for computer control not to exceed 90°F
              • 65% Maximum relative humidity for system computer
              • Dust exhaust system: (V=30M/S at a low pressure of 12M BAR)
              • Compressed air requirement: 30 HP with at least a 25-gallon air receiver
              • Hydraulic oil
              • Skilled operating and maintenance personnel
              • Properly illuminated working environment
              • Dust Piping: 8” diameter

                NOTE: Price Includes Startup & Training
                 
              Comments: The perfect Finger Jointer for I-Beam Flanges and other long boards
              *Dimensions Available From Product Manager
              *Weight: Please Call
              *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
              Terms & Conditions AMEX
              人香蕉猫咪视频伊在线
              <center id="qox4j"><small id="qox4j"><track id="qox4j"></track></small></center>
                <code id="qox4j"><em id="qox4j"></em></code>
              1. <center id="qox4j"><small id="qox4j"><track id="qox4j"></track></small></center>
                  <center id="qox4j"><em id="qox4j"><track id="qox4j"></track></em></center>
                1. <strike id="qox4j"><video id="qox4j"></video></strike>